Maxbore.com throttle body boring service
Please include ALL the parts that make the TB open and close, I need to make sure your TB fully works before mailing it back to you.
Your TB is a fragile part that can be damaged during shipping. Please use a box large
enough so the TB does not touch the inside of the box. If you are sending the TB with the
TPS make absolutely sure that the TPS is not touching the inside of the box.
Please follow these recomendations for packing:
Use the right size box. Not too large or too small. If you are shipping with the USPS,
they have priority flat rate boxes for free and the shipping cost is very reasonable. Use their
Medium size. It is just the right size for shipping a TB.
Make a 1 to 2 inch thick bed for the TB to lay on. You can use crumpled newspaper or any
other kind of paper.
Then build the sides of the TB with more crumpled paper until it is even with the top of the TB.
finally, place a layer of paper over the TB and sides. Make sure there is enough crumpled paper to keep
the TB from moving inside the box once you tape it.
Please include a piece of paper with the following:
It must be in the box or your order might be delayed
YOUR STREET ADDRESS
YOUR EMAIL ADDRESS
YEAR, MAKE, AND MODEL the TB came out of.
1742 S. Woodland Blvd.
Deland FL, 32720
Email me if you have questions not answered here.